Interfacing (DSI, CSI, I2C, etc.) • Re: Dynamically change Voltage in GPIO pins.

This wires would have 1.57 steady voltage ... that wire should go up like 3.2v and ... decrease from 1.57 to 0v.

With GPIO_X high, GPIO_Y input, the Vout should be about 3.2V
With GPIO_X high, GPIO_Y low, the Vout should be adjustable to 1.57V
With GPIO_X input, GPIO_Y low, the Vout should be about 0VYou might want to take that through an op-amp to avoid any issues of loading Vout.

Statistics: Posted by hippy — Wed May 01, 2024 9:47 pm

---