At a guess, the Korg G1 is breaking the USB spec and backpowering 5V to the host device (the Pi). Under some situations this can cause the Pi to get upset. Using a USB hub is normally the easiest route forward.
For any USB class compliant devices there should be no need for additional drivers. If you can get the device listed by lsusb, then post the output from "sudo lsusb -vv"
For any USB class compliant devices there should be no need for additional drivers. If you can get the device listed by lsusb, then post the output from "sudo lsusb -vv"
Statistics: Posted by 6by9 — Mon Aug 19, 2024 4:10 pm