You did not tell us about your solenoid, so I can provide a diagram,, but not tell you if what you bought is powerful enough to handle the solenoids you have or not. This is basically how you'd connect it all together.
In the picture, the lock represents your solenoid.
The PSU you use must provide enough power (correct voltage and current) required by your solenoid plus some more for wiggle room. So if your solenoid is a 12v one that uses 1A,then use. 12V 2A PSU. A 12v 1.5A would work two.
You'll need to find out what your solenoid needs.
The PSU you use must provide enough power (correct voltage and current) required by your solenoid plus some more for wiggle room. So if your solenoid is a 12v one that uses 1A,then use. 12V 2A PSU. A 12v 1.5A would work two.
You'll need to find out what your solenoid needs.
Statistics: Posted by memjr — Tue Feb 13, 2024 5:05 am