I have a brand new RPi5 that has been working using an old charger capable of 2A load. No extra equipment were added except for keyboard/mouse at first.
When I connected an NVME drive, the RPI5 started as before but the drive was not detected. When I tried a brand new PD charger capable of delivering 3A@5V, the RPI5 stopped working.
1) When I try to boot it with SD card having bootloader update firmware, it flashes 4 long, 5 short and red screen on display.
2) When the SD card is loaded with OS the status led is constant red.
3) When I try SD with OS and serial debug no serial infos are given.
4) When I try SD with bootloader update and serial debug the following log is displayed:
Thank you in advance for your help.
When I connected an NVME drive, the RPI5 started as before but the drive was not detected. When I tried a brand new PD charger capable of delivering 3A@5V, the RPI5 stopped working.
1) When I try to boot it with SD card having bootloader update firmware, it flashes 4 long, 5 short and red screen on display.
2) When the SD card is loaded with OS the status led is constant red.
3) When I try SD with OS and serial debug no serial infos are given.
4) When I try SD with bootloader update and serial debug the following log is displayed:
Code:
1.85 pieeprom.sig 1.85 hash: 6fafdd66f0bb1f9ad5eb68ba7ba1fb537a6182567e9be83e64bf9a2d2591820a 1.91 ts: 1727272381 2.28 Unexpected error @ 0x00010164 2.28 USB-OTG disconnect 2.31 BOOT ERROR: code 45 - '' Statistics: Posted by nadirpi23 — Wed Oct 23, 2024 9:29 am