I am running the 6.6-28 kernel
Is there a specific way to flash the vl805 firmware to the bootloader
rpi-eeprom-update utility specifies '-u' flag however seems like i may be missing something
Is there a specific way to flash the vl805 firmware to the bootloader
rpi-eeprom-update utility specifies '-u' flag however seems like i may be missing something
Code:
sudo rpi-eeprom-update -u /lib/firmware/raspberrypi/bootloader-2711/latest/vl805-000138c0.bin *** CREATED UPDATE /lib/firmware/raspberrypi/bootloader-2711/latest/vl805-000138c0.bin ***strings: '': No such file/usr/bin/rpi-eeprom-update: 198: [: Illegal number: CURRENT: Fri 17 May 11:26:58 UTC 2024 (1715945218)date: invalid date ‘@’ UPDATE: () BOOTFS: /boot/firmwareUPDATING bootloader. This could take up to a minute. Please wait*** Do not disconnect the power until the update is complete ***If a problem occurs then the Raspberry Pi Imager may be used to createa bootloader rescue SD card image which restores the default bootloader image.flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=16000 -w /boot/firmware/pieeprom.updError: opening file "/boot/firmware/pieeprom.upd" failed: No such file or directoryflashrom unknown on Linux 6.6.51+rpt-rpi-v8 (aarch64)flashrom is free software, get the source code at https://flashrom.orgUsing clock_gettime for delay loops (clk_id: 1, resolution: 1ns).Found Winbond flash chip "W25X40" (512 kB, SPI) on linux_spi.===This flash part has status UNTESTED for operations: WPThe test status of this chip may have been updated in the latest developmentversion of flashrom. If you are running the latest development version,please email a report to flashrom@flashrom.org if any of the above operationswork correctly for you with this flash chip. Please include the flashrom logfile for all operations you tested (see the man page for details), and mentionwhich mainboard or programmer you tested in the subject line.Thanks for your help!UPDATE FAILEDStatistics: Posted by akurhade — Thu Dec 19, 2024 7:47 pm