Hello,
I'm trying to use non standard camera on RPi5. This camera initially was created for jetson orin, but 22 pin cable is compatible with RPi5.. almost. On the camera there is EEPROM memory that is recognized by i2cdetect tool, but the image sensor itself not. The schematic for camera is not provided, but on pin 18 there is mentioned 'camera clock'. Camera has a case so I'm not able to look inside, but probably it doesn't have its own cristal and the clock has to be provided externally. In this thread viewtopic.php?t=369157 there was mentioned that CSI pinout connector is the same like in CM board, and here I have question - is it true that pin 18 is not connected anywhere?
I'm trying to use non standard camera on RPi5. This camera initially was created for jetson orin, but 22 pin cable is compatible with RPi5.. almost. On the camera there is EEPROM memory that is recognized by i2cdetect tool, but the image sensor itself not. The schematic for camera is not provided, but on pin 18 there is mentioned 'camera clock'. Camera has a case so I'm not able to look inside, but probably it doesn't have its own cristal and the clock has to be provided externally. In this thread viewtopic.php?t=369157 there was mentioned that CSI pinout connector is the same like in CM board, and here I have question - is it true that pin 18 is not connected anywhere?
Statistics: Posted by Lukasss — Wed Feb 19, 2025 6:13 am