Thanks for the replies.
I have tried with various panel timings, but the black screen remains (with a white flashing screen first). I tried to write some random pixels to the screen at this did not work either. If the problem is only with the panel timings I would assume I would at least see something on the screen.
I still have this errorbut the command time seems to change depending on my panel timings or clock frequency.
Do I have all the parts I need to make this work? (ICN6211 module + overlay)
Do I have to write my own panel driver for the ST7262 or can I just use panel-dpi?
I have tried with various panel timings, but the black screen remains (with a white flashing screen first). I tried to write some random pixels to the screen at this did not work either. If the problem is only with the panel timings I would assume I would at least see something on the screen.
I still have this error
Code:
[ 3.072166] drm-rp1-dsi 1f00130000.dsi: [drm] rp1dsi: Command time (outvact): 16[ 3.073330] drm-rp1-dsi 1f00130000.dsi: [drm] rp1dsi: Nominal Byte clock 18055555 DPI clock 24074070 (parent rate 200000000)Do I have all the parts I need to make this work? (ICN6211 module + overlay)
Do I have to write my own panel driver for the ST7262 or can I just use panel-dpi?
Statistics: Posted by jklarsson — Thu Feb 27, 2025 9:05 am