I was going to say everything I use is made by Raspberry because I thought it was until I just checked the 3 of the power supply's which have the Viloros name on them although the output voltage and current is correct it doesn't say raspberry on it. Since I bought all of my Raspberry Pi's from the same place the Power supply's are going to have there name on it but I'll check the requirements after I post this to see if there is anything that would have a negative influence on the Pi's. I had it reboot using the 32 Bit Bookworm doing a still and a video but then it also worked correctly a few times as well so the only issue I found was what I have already posted regarding the WARN message.Normal response to any problem with spontaneous reboots - what power supply are you using?
Whilst it may manage preview with rpicam-hello, but throw in the extra processing for JPEG encode etc, and a duff power supply can trigger the Pi to reboot.
EDIT** So all the Power supply's for the Pi Zero 2 W's is Output 5v and 2.5amp which is what raspberry pi requires. I am going to make sure the Power supply for the 4B's and 5's are correct as well. From what I can tell the only power supply that looks to be to small is the one they sent for the Pi4 its supposed to be the same as the Pi5 which I am going to call them out on since I bought 2 Pi4's from them.
Thank You
Krampapas
Statistics: Posted by Krampapas — Wed May 14, 2025 10:05 pm