Yes, I still have microHDMI port 2 as a backup when microHDMI port 1 finally dies. I just unplug the HDMI cable from the monitor and whack the cable connected to the Pi 5 microHDMI port in my backpack. This probably causes more strain than unplugging and plugging a microHDMI wireless adaptor.
Hexciting 3D print by the way![:-)]( "Smile")
I'm guessing this is the hardware for the Waveshare port save board?
I think I'll focus on the wireless HDMI option, which opens up some other opportunities (https://youtu.be/EyR2-C9ggi0?t=1197), in terms of minimal physical stuff (cable management or lack thereof), which breaks and takes up space.
Potentially a wireless HDMI might work via USB-A or USB-C, or even the microHDMI ports 1 or 2 should be ok.
Still researching.
Hexciting 3D print by the way
I'm guessing this is the hardware for the Waveshare port save board?
I think I'll focus on the wireless HDMI option, which opens up some other opportunities (https://youtu.be/EyR2-C9ggi0?t=1197), in terms of minimal physical stuff (cable management or lack thereof), which breaks and takes up space.
Potentially a wireless HDMI might work via USB-A or USB-C, or even the microHDMI ports 1 or 2 should be ok.
Still researching.
Statistics: Posted by eiger3970 — Wed Jun 25, 2025 9:03 am