Thank you @fchk and @ thagrol for your replay.
So I will connect All USB3.0 and USB2.0 signals of My Type C connetor to Six USB Signal of CM5 via my Multiplexer HD3SS3220. And My Type C Connetors's CC1 and CC2 will connect with HD3SS3220.
And CC1 and CC2 of CM5 will remain N.C. Because i am not using another type C for OTG / Programing. ( I am using USB - micro B USB 2.0 for programing )
I am supplying 5V to my USB Device using power switch. And i will control this switch using 111.VBUS_EN.
One more question, what is the Function of that 111.VBUS_EN signal can i connect this signal with multiple USB Connectors ? ( LIke I have one more USB3.0 type A connector )
So I will connect All USB3.0 and USB2.0 signals of My Type C connetor to Six USB Signal of CM5 via my Multiplexer HD3SS3220. And My Type C Connetors's CC1 and CC2 will connect with HD3SS3220.
And CC1 and CC2 of CM5 will remain N.C. Because i am not using another type C for OTG / Programing. ( I am using USB - micro B USB 2.0 for programing )
I am supplying 5V to my USB Device using power switch. And i will control this switch using 111.VBUS_EN.
One more question, what is the Function of that 111.VBUS_EN signal can i connect this signal with multiple USB Connectors ? ( LIke I have one more USB3.0 type A connector )
Statistics: Posted by mukesh1992 — Thu Jun 26, 2025 7:41 am