Hi All,
I have a Raspberry Pi 4 with a HAT PCB to connect it to a Clipsal CBUS Network. It is configured to allow serial I/O through to the network connection.
It was initially working great for over 2 months then it just stopped, i can still see the CBUS side from my PC Toolkit software, but can't connect locally via the network port.
The supplier of the HAT PCB can remote into the Pi 4 network connection and see/do all that we need it to do using the Toolkit software, but i can't do the same thing via a local connection through our switch or via a direct network cable from a PC to the Pi 4.
It does seem to Ping, but the Toolkit software i need to use just isn't seeing it.
I have another similar device that is working ok on the same network without issue, but it is direct and not through a Pi PCB.
Any ideas could be helpful.
regards
Trevor
I have a Raspberry Pi 4 with a HAT PCB to connect it to a Clipsal CBUS Network. It is configured to allow serial I/O through to the network connection.
It was initially working great for over 2 months then it just stopped, i can still see the CBUS side from my PC Toolkit software, but can't connect locally via the network port.
The supplier of the HAT PCB can remote into the Pi 4 network connection and see/do all that we need it to do using the Toolkit software, but i can't do the same thing via a local connection through our switch or via a direct network cable from a PC to the Pi 4.
It does seem to Ping, but the Toolkit software i need to use just isn't seeing it.
I have another similar device that is working ok on the same network without issue, but it is direct and not through a Pi PCB.
Any ideas could be helpful.
regards
Trevor
Statistics: Posted by Trevor_2025 — Tue Oct 14, 2025 12:34 am