Hailo • HAT + and PimoRoni NVME Base duo....
Is it possible to use the following together:Raspberry PI5AI HAT +Pimo Roni NVME Base DUOand 52pi DOUBLE fpc PCIe hatI'm trying to boot off of, use an NVME 2280 drive, and the AI HAT+. (Although, I...
View ArticleTroubleshooting • Re: SD Card corruption
What is really the goal?Usually, one does not care about the media itself. Everything is cheap these days and there is no point in crying over a defective SD card (or, for that matter, just about any...
View ArticleCompute Module • Re: Using eMMC as MSD after booting from NVME
I was able to mount the eMMC disk after all.I tried the "New Partition UUID" but the eMMC disk was not automatically mounted. I was hoping it would be automatically mounted the same way that the NVMe...
View ArticleClik here to view.
HATs and other add-ons • Re: "Active Cooler" thermal pad size
I tried again, and now I've done it!I have now cut the pads to the exact size and stacked them. The side with the PMIC is slightly higher, but everything is in its place! The temperatures are also...
View ArticleClik here to view.
Troubleshooting • rpi wont boot
rpi wont boot, stuck on this screen, has sd card with os in the portThank you!Statistics: Posted by Gdawg! — Thu Jan 23, 2025 1:15 am
View ArticleGeneral discussion • SanDisk 256GB GamePlay microSD card...
Hello. I saw this sdcard today on amazon? What do you think? Better than the Sandisk extreme pro card for RPI5? SanDisk 256GB GamePlay microSD card for portable/handheld gaming devices, up to...
View ArticleGeneral discussion • Re: Pi Server Backup
You could boot your Pi from another device and then use gparted to shrink the big partition down to a value you like better.Statistics: Posted by W. H. Heydt — Thu Jan 23, 2025 1:19 am
View ArticleTroubleshooting • Pi wont boot when all GPIO pins are in use
Hey everyone,I got some male-to-female jumper wires, to make connections to my Pimoroni Inky pHAT and my Pimoroni Blinkt, so I dont bend the GPIO pins when atttaching and removing HATs, and when I...
View ArticleGraphics, sound and multimedia • Re: How many streams can Raspberry Pi 5 handle?
Great info, thanks guys. 1) For v4l2slh265dec , when you say "it's being worked on" is that captured in this issue: https://gitlab.freedesktop.org/gstreame ... ssues/14882) Do you happen to know if...
View ArticleHATs and other add-ons • Re: HAT + and PimoRoni NVME Base duo....
Sorry... I have looked for days and i can't seem to find an answer to this question... Can I boot up the Raspberry Pi 5 off of an NVME drive, attached to the Pimoroni DUO base hat, and still use the...
View ArticleGeneral • Re: RP2040 counter error.
If you can use GPIO20 (CLOCK GPIN0) or GPIO21 (CLOCK GPIN1) as input and (assuming a Pico) GPIO23 (CLOCK GPOUT1) as output then you could maybe use a clock generator; see 2.15 Clocks in the RP2040...
View ArticleClik here to view.
General • Re: Any NDA options to receive early information on upcoming...
I'm still pushing for some clarification on the RP2350 production and to get it officially published.Hmm, I'm afraid this didn't answer my OP inquiry above?(i.e. I assume it was in response to MikeDB...
View ArticleTroubleshooting • Re: rpi wont boot
Isn't this a duplicate/continuation of your other thread here?viewtopic.php?p=2288231#p2287462Statistics: Posted by ame — Thu Jan 23, 2025 2:54 am
View ArticleRaspberry Pi OS • Re: HDMI Audio with Desktop but not Console boot (Bookworm)
Code: speaker-test -t wav -c 5I tested this with KMS set in the boot config and I was able to hear the test audio. I don't understand why I can't here it without the test. I am intending to use this...
View ArticleAdvanced users • Re: Bookworm: Looking for suggestions to reduce disk...
You might consider approaching this from the other end. Start with RPiOS Lite and then add only the packages you want (letting apt pull in any dependencies).Statistics: Posted by W. H. Heydt — Thu Jan...
View ArticleTroubleshooting • Rpi 5 with blinking LED after accident
I have a Raspberry Pi 5, and recently I had it running while it was in my hand to try and fix another issue with my touchscreen display, but while I had it in my hand, I dropped it and now the LED is...
View ArticleGeneral • Re: FP/M release v0.1
I wonder what is the memory model, some requirements to the linking - I have not found any in your examples, how the binary is linked, how would you like to provide command line parameters to the...
View ArticleGeneral discussion • Raspberry Pi and Pico: Sending Fast Data over USB...
Recently I have been in search of a solution for my project.I need to know how to pass quick data from a pico 1 over USB to a raspberry pi 4 (raspi os latest). This would mean programming the pico to...
View ArticleRaspberry Pi OS • Re: Bookworm: Looking for suggestions to reduce disk...
You might consider approaching this from the other end. Start with RPiOS Lite and then add only the packages you want (letting apt pull in any dependencies).I went down that path, but it didn't help....
View ArticleClik here to view.
MicroPython • PULL_UP PULL_DOWN State is back to front?
HiI am using the Wokwi emulator, so I'm not sure if it's the emulator, my electronics, my code or my understanding, but the following code and wiring start low and pulls high, which is incorrect for a...
View Article
