Thanks for the explanation of the name, it makes sense.
You were correct, the wiring was not ok, the SCL was connected to the incorrect pin, my bad, excuse my clumsiness.![:oops:]( "Embarrassed")
Thanks a lot for your support!
Lets see if I'm able to read the values![:D]( "Very Happy")
You were correct, the wiring was not ok, the SCL was connected to the incorrect pin, my bad, excuse my clumsiness.
Thanks a lot for your support!
Lets see if I'm able to read the values
Code:
$ ls /sys/bus/iio/devices/iio:device0 buffer in_accel_scale in_accel_z_calibbias in_anglvel_x_raw in_temp_offset sampling_frequency waiting_for_supplierbuffer0 in_accel_scale_available in_accel_z_raw in_anglvel_y_calibbias in_temp_raw sampling_frequency_availablecurrent_timestamp_clock in_accel_x_calibbias in_anglvel_mount_matrix in_anglvel_y_raw in_temp_scale scan_elementsdev in_accel_x_raw in_anglvel_scale in_anglvel_z_calibbias name subsystemin_accel_matrix in_accel_y_calibbias in_anglvel_scale_available in_anglvel_z_raw of_node triggerin_accel_mount_matrix in_accel_y_raw in_anglvel_x_calibbias in_gyro_matrix power ueventStatistics: Posted by Sgcollado — Mon May 12, 2025 8:37 pm