Hello everyone!
Well, recently I bought a Raspberry PI 4 B for create a print server. This because I have an old Brother printer (DCP-T300 model) that doesn't have any wireless connection via WiFi. The problem that I have is I don't have enough space in my desk and my family want to use the print in their devices like laptops, tablets, etc.
I have intermediate experience with Debian OS like Ubuntu or Kali, but the Raspberry OS is new to me, so I don't know if there is something I'm doing wrong. First to all, I was following the next 2 videos for the installation:
1)This one in Spanish https://www.youtube.com/watch?v=OpVkQZN ... O&index=11
2)This one in English https://www.youtube.com/watch?v=hdwqQjD ... e=youtu.be
Basically, I install CUPS and SAMBA, where CUPS is the central part of the server, where I can install the printer and create a "instance" for the use of my local network. Also I installed the drivers for the printer in the page of Brother for the Linux OS. The problem goes when I want to print something, the printers appears as options, and the CUPS server takes the petition, shows the message "Complete at DATE" (Like I send in the attached Image). I search if it was a problem with the printer or with the rasp, but when I run the command "usb-devices" for validate if the printer is detected, the console sends me the info below for my printer:
us=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=04f9 ProdID=0393 Rev=01.00
S: Manufacturer=Brother
S: Product=DCP-T300
S: SerialNumber=BROJ7H613021
C: #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
T: Bus=01 Lev=02 Prnt=10 Port=03 Cnt=01 Dev#= 3 Spd=480 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1a40 ProdID=0101 Rev=01.00
S: Product=USB2.0 HUB
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
I been stuck around 2 months with this and I don't have any idea what is happening, if anyone can help me with this I been forever gratefully.
Best regards and I'll stay patient for your answers.
Well, recently I bought a Raspberry PI 4 B for create a print server. This because I have an old Brother printer (DCP-T300 model) that doesn't have any wireless connection via WiFi. The problem that I have is I don't have enough space in my desk and my family want to use the print in their devices like laptops, tablets, etc.
I have intermediate experience with Debian OS like Ubuntu or Kali, but the Raspberry OS is new to me, so I don't know if there is something I'm doing wrong. First to all, I was following the next 2 videos for the installation:
1)This one in Spanish https://www.youtube.com/watch?v=OpVkQZN ... O&index=11
2)This one in English https://www.youtube.com/watch?v=hdwqQjD ... e=youtu.be
Basically, I install CUPS and SAMBA, where CUPS is the central part of the server, where I can install the printer and create a "instance" for the use of my local network. Also I installed the drivers for the printer in the page of Brother for the Linux OS. The problem goes when I want to print something, the printers appears as options, and the CUPS server takes the petition, shows the message "Complete at DATE" (Like I send in the attached Image). I search if it was a problem with the printer or with the rasp, but when I run the command "usb-devices" for validate if the printer is detected, the console sends me the info below for my printer:
us=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=04f9 ProdID=0393 Rev=01.00
S: Manufacturer=Brother
S: Product=DCP-T300
S: SerialNumber=BROJ7H613021
C: #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
T: Bus=01 Lev=02 Prnt=10 Port=03 Cnt=01 Dev#= 3 Spd=480 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1a40 ProdID=0101 Rev=01.00
S: Product=USB2.0 HUB
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
I been stuck around 2 months with this and I don't have any idea what is happening, if anyone can help me with this I been forever gratefully.
Best regards and I'll stay patient for your answers.
Statistics: Posted by geth01semane — Sun Jun 22, 2025 6:45 am