Hello, I am working on a computer vision project using the Raspberry Pi 5. I installed “Raspberry Pi OS (64-bit)” and connected to the board remotely from my laptop. I’m using the Raspberry Pi Camera Module 3 (IMX708). After connecting the board and the camera, I typed “libcamera-hello” in the terminal, but it shows “command not found.”
For reference, I already ran sudo apt update and sudo apt upgrade, and I have also installed the OpenCV library. I thought it might be an OS issue, so I tried reinstalling the OS on multiple SD cards and went through the setup process again, but I still get the same problem every time.![:(]( "Sad")
I would like to know what is causing this issue. Is it because I’m connecting remotely? Or did I install the wrong OS? Any help would be appreciated.
For reference, I already ran sudo apt update and sudo apt upgrade, and I have also installed the OpenCV library. I thought it might be an OS issue, so I tried reinstalling the OS on multiple SD cards and went through the setup process again, but I still get the same problem every time.
I would like to know what is causing this issue. Is it because I’m connecting remotely? Or did I install the wrong OS? Any help would be appreciated.
Statistics: Posted by silviaaa — Mon Nov 17, 2025 10:02 am