Troubleshooting • Chromium annoyance
Hi all,Since I started using Trixie I have run into a real Chromium annoyance.The OS version is...Code: Linux trixie-desktop 6.12.47+rpt-rpi-2712 #1 SMP PREEMPT Debian 1:6.12.47-1+rpt1 (2025-09-16)...
View ArticleKeyboard computers (400, 500, 500+) • Re: A good linux OS for a Raspberry Pi...
Hi There's nothing wrong with Raspberry Pi Os but I use linux mint on a PC and am interested to try something similar on a Pi. I thought of Ubuntu but the latest versions seem to choke the Pi 400....
View ArticleOther projects • Re: outdoor Pi enclosure that works well
Punch a hole in the box. A "sealed" enclosure will warm up during the day, then at night the air inside will contract, drawing in moist air, even against the best seal. This moist air will condense...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: Forward keystrokes from one computer...
Thank you for your thoughts. I am familiar with software solutions, but for this specific case, I need very strong separation between the 2 devices, and one of the devices has no internet access.and...
View ArticleHATs and other add-ons • Re: 52Pi vs Waveshare PoE+NVMe HAT for RPi5...
Normally, after shutting down the Raspberry Pi, it will stay shut down. We recommend using a multimeter or oscilloscope to check if the 5V voltage on the Raspberry Pi drops when it's shut down. If the...
View ArticleGeneral • Re: I2C operation does not survive jump to user program
I2C0 is on GP16/GP17I2C1 is on GP14/GP15Anyways, after much pouring over the assembly code, I had the idea to connect a logic analyzer to the bus (wish I started with this!), and found that the bus...
View ArticleCompute Module • Re: Using a USB mux switch for the USB 2.0 port in CM5...
Yes, I have referred the cm4 io board and to me it looks like the USB MUX switch connection is fine but the difference in my design is the USB_OTG pin from the connector to the CM5 has no connection...
View ArticleWanted • 2.5 Gb USB-C adapters?
What would you recommend for 2.5 Gb USB-C adapters that are compatible with PI 5 on Raspberry Pi OS Lite? (Preferably available on Amazon)Statistics: Posted by HawaiianShirtGuy — Mon Oct 27, 2025 4:27...
View ArticleTroubleshooting • Re: Trixieand cyrus-imap
Thanks mitu for that - pity as the 3A+ is memory limited. Have installed the 64-bit version and cyrus-imap is running OK. Have to be careful what I run at the same time as otherwise the OOM killer...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: Small TFT based on ILI9341 ST7789 -...
If anybody has tried my solution for the ili9486 and ili9488 RED SPI LCD,Have you noticed that the displayed image is offset by 5 or 10 pixels to the right? The right pixels are "beyond the LCD", and...
View ArticleTroubleshooting • Re: [solved] Pi4B Recently Drops WiFi
I mistakenly assumed that the whole thread would be deleted. As it stands it makes no sense at all.If a volunteer takes the time to offer their help, it might be perceived as rude to delete their...
View ArticleRaspberry Pi OS • Losing DHCP lease (again) with Trixie
I had this problem before: All my WLAN connected Raspberry Pi machines lost their network connection after 1-3 days. The problem went away after I changed my router (from Synology RT2600 to Ubiquity...
View ArticleTroubleshooting • Re: Old RPi Zero W
Hello,In one of my drawer i found an old RPi Zero W, i I want to use it, so i decied to burn a MicroSD an see.I used the Rpi Imager and select the device and the os, but it is working when attached to...
View ArticleClik here to view.
SDK • Re: SOLVED : Anyone got assembly code for 32x32 => 64 that works?
Can't get more generic than the 32 bits meaning any of 8 different fixed-point types Also the *solved* was premature, it *still* doesn't work for certain signed values, I need to engage my brain much...
View ArticleGraphics, sound and multimedia • Re: Sound system advice
Been doing some looking around. It looks like the Raspberry Pi 5 16GB is the fastest card. I'd also need some sort of power supply that can do a graceful restart/power down with the car's ignition...
View ArticleBeginners • Re: PowerPoint (or similar) display project
Ah, maybe also have a look at the various pi based digital signage packages, e.g. Screenly (Anthias (free)), PiSignage, Yodeck etc.This. There are many more, some can display document like PowerPoint....
View ArticleBeginners • Re: My First Pi Project: USB over IP?
Anyway, not an ideal first Pi project.HA! well this got a lot of activity. my units were 25-30 feet.I think for short term application I will go with the USB C -> Ethernet cable -> USB C...
View ArticleGeneral discussion • Re: integrated Raspi notebook like by AMD or Intel cpus?
From what I read, the GPIO is provided by a USB adaptor. If you want notebook + GPIO, can you use the Argon GPIO USB adaptor with other computers? If so, I would buy the adaptor for use with my...
View ArticleGeneral • Re: [overclocking] RP2350 at 700 MHz (PIO alone at 1560 MHz) with...
You got me with thisCode: // Configure PLL system to 900 MHz pll_init( pll_sys, // PLL to configure 1, // REFDIV 75, // FBDIV <===== Say what 1, // PD1 1 // PD2 );the API is Code: void pll_init(PLL...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Can Bus message id issue with Rpi 5
I have been working on with a pcb for car use. Project on Github: https://github.com/valtsu23/Automotive_hatHardware and software:Raspberry Pi 5 4Gb, with Raspberry OS Lite (Bookworm and Trixie tested...
View Article